Hunter - WMCLIK - Wireless Mini-Clik Rain/Freeze Sensor

Hunter Wireless Mini-Clik Sensor, rain/freeze-clik sensor, adjustable from ⅛" to ¾" of rainfall, aluminum mount. This sensor halts scheduled irrigation when it detects temperatures below 37°F or a preset level of rain has fallen to stop water waste.

Features

• Wireless Operation: Up to 800' (243 m) line-of-sight. No wires are required between the rain sensor and controller.
• Shuts off irrigation automatically when the sensor detects rainfall from ⅛'' to ¾'' or temperatures below 37°F.
• Debris tolerant for reliable operation and no unnecessary shutdowns
• Rain/Freeze Sensor with "Normally Closed" Switch
  
• Mounts to any vertical surface, fences or walls, or use the included SGM (sensor gutter mount) for gutter installs
  
• Compatible with Hunter and most non-Hunter controllers
• Optional Quick Response® technology triggers faster system shutdown for plant protection
• Quick Response:
• Time to turn off irrigation system: approximately 2 to 5 minutes for Quick Response
• Time to reset Quick Response: approximately 4 hours under dry, sunny conditions
• Time to reset when fully wet: approximately 3 days under dry, sunny conditions

Key Benefits

• Optional Quick Response®: Innovative technology that turns off the irrigation system immediately rather than after it has accumulated a fixed amount of rain. No calibration is required.
  
• Freeze Sensor: Designed to keep the irrigation system from operating when temperatures drop to 3°C or below. When temperatures rise above this temperature, the sensor will enable automatic watering.
• Maintenance-Free Design: Provides trouble-free operation for at least 5 years. There are no batteries to replace.
• Automatic Synchronization: The Wireless Mini-Clik Transmitter will send wireless signals every hour to the receiver to ensure that the sensor and receiver are continuously synchronized.
• Lost Communication/Battery Status Indication: The Sensor Bypass LED will flash if the receiver has not received a signal from the sensor. This can indicate a low or dead battery.

Irrigating a landscape during a rainstorm not only results in oversaturated plants and turf, it also wastes water. Hunters Mini Clik rain sensor provides the simplest, most effective way to prevent sprinklers from running during or after any level of rainfall. It easily installs on any automatic irrigation system. The Mini-Clik stops scheduled irrigation when it detects a pre-set level of rain has fallen. This automatic process ensures landscapes aren't watered during a storm. Once the storm passes, the Mini-Clik allows the controller to resume normal irrigation. Mini-Clik is compatible with all Hunter controllers, and once plugged in, it ensures that a system doesn't water during the rain.